View Single Post
  #1  
Old 06-15-2009, 04:42 PM
mrbmwx5's Avatar
mrbmwx5 mrbmwx5 is offline
Premier Member
 
Join Date: Jun 2006
Location: Brownstwn,Michigan.
Posts: 4,794
mrbmwx5 is on a distinguished road
DIY..How to install the rear bumper supports and flairs.

For all of you who's want and wonder how i installing my fenders flairs
and rear bumper supports on my car
I did it this way and it been on for last two years and had drove to car across the country and they STILL on...
I skipped the BMW instruction and come up with my own instruction this way you dont have to remove the bumper or special tools needed ( This way ... If you decide to sale your car you can remove these parts and have no holes on the bumper)
This is easiest way and quickest way to do it.
Many of you had seen it on my car at the CT MEET
Total time 40 minute
Step 1)

Trim of all the taps inside the flairs .
In this picture is just the one that i have in my photo file
but you get the idea what i mean....



Step 2) This is for the front ( I have the flairs without the wheel arch so this is my modification so i dont have to buy the complete kit)




Step 3) Do the same for the rear bumper supports trim off all the taps from
the inside of the supports trim and attach like i did here.
mount the buttom tap first.


With all those taps been trim off all you need is putting some screws like i did here.



And you all done.... Enjoy your new MODs





Last edited by mrbmwx5; 06-15-2009 at 05:34 PM.
Reply With Quote

Sponsored Links