|
Breyton, Where the hell you been man?? Haven't heard from you in ages! I was in Toronto a couple of times but lost your number. Send me a PM with your contact info. Maybe we'll hook up when I'm in town again...
I recently had my 4.6is tips welded on as well. You have to be VERY careful to align the tips before they are welded on. There have been many complaints from people that got their's welded on and can not get them level.
I had a master welded install mine. Here's what I had to do...
1. Measure from the muffler to the end of the existing tip
2. OR hold the new tip where you want it and how far you want it sticking out
3. Mark the two existing exhaust pipes
4. Remove the exhaust off the vehicle
5. Cut the existing tips where you marked them
6. Temporarily pit the exhaust back in place
7. With the vehicle raised, hold the new tip exactly where you want it and level
8. Have the welder spot weld it just to hold it in place
9. Remove the exhaust again and weld the tip on properly
10. Do the same for the other side!
I took these pics with my phone...
|