Contributed by: X5world
Reprogramming Key Fob
To do this procedure you need to have one working key and one key that needs to be programmed.- with the both keys, get in the car and close all windows and doors.
- Put working key into the ignition and turn to position 1 (the accessories should turn on)
- turn the key back to position 0 and take key out of the ignition.
- Using the working key, hold down the unlock button, press the Roundel (lock button) 3 times, and release the unlock button. Doors should lock and unlock.
- With the new key, hold down the unlock button and press the Roundel (lock button) 3 times and let go of the unlock button. Doors should lock and unlock and you're done!!
Alternate procedure if above doesn't work or if you do not have a working remote:- Place key in the ignition and cycle back and forth between position 0 and position 1 five times very quickly
- Remove the key from the ignition
- While holding down the unlock button, press the lock button 3 times and then release the unlock button. The doors should lock and unlock to confirm the programming.
- If you have another key to program then repeat step 3 for the additional remote(s). The doors should lock and unlock to confirm the programming.
- Turn on ignition to finalize
Part number for replacement master key/remote: 66-12-6-955-750