Quote:
Originally Posted by rogerkiu
Buy a ball joint extractor, then you are good to go.
|
Why? Aren't the ball joints bolted to the wheel hub? I'm replacing the arms and ball joints.
Quote:
Originally Posted by recklessspyder
....and you must tighten the connections with weight on the wheels.
there are quite a few threads out there that go through this process.
|
Yeah, there are several threads, and each has a snippet of useful information: 74 lb-ft for ball joints, tighten bushings (how tight??) wheels on ground, flat bicycle 18mm(?) wrench for sway bar rods, etc.
I have yet to find a start to finish thread with details.
I'll order the service manual.