|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
05-07-2011, 06:17 PM
|
|||
|
|||
|
Code 1845
2002 X5 4.4i with 168000 Kilometers. ( 100000 miles ) Vehicle went into Trans Fail safe mode. Engine light came on. Pulled code and shows P1845 (Pressure Control Solenoid "E" Low) So.... What does that mean and is it something I can do myself? Where is the pressure control solenoid? Last edited by DTC9968; 05-07-2011 at 06:30 PM. Reason: Add engine size 
|
| Sponsored Links | |
|
|
|
|
#2
05-07-2011, 06:56 PM
|
||||
|
||||
|
It is inside the transmission, attached to the valve body. You may not require a transmission overhaul, but you do require someone who is familiar with the transmission and can further diagnose the problem. There are numerous posts here about ZF tranmission overhauls; you can see the solenoids in the photos in those posts.
Edit: http://www.xoutpost.com/bmw-sav-foru...long-post.html See this thread, look at post #20, last photo. It could be a solenoid, a wiring harness problem, or a mechanical/hydraulic issue in the circuit that contains that solenoid.
__________________
2007 X3 3.0si, 6 MT, Premium, White Retired: 2008 535i, 6 MT, M Sport, Premium, Space Grey 2003 X5 3.0 Steptronic, Premium, Titanium Silver 2002 325xi 5 MT, Steel Grey 2004 Z4 3.0 Premium, Sport, SMG, Maldives Blue Last edited by JCL; 05-07-2011 at 07:05 PM.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
