Coding, what not to forget?

[X5_E53_N62]

Will do the 1 click 3 blink turning light (if possible) but what else to do when I am already in there?

Thanks

[BabyCAP]

fogs on w/ hi beams
hi beams on with low beams
disable corner/parking lamp
disable seat belt chime - no flaming please
double flash hazards
window/roof close with remote
mirror fold with remote (not sure if this is available)
if you have aftermarket bulbs you can turn off cold monitoring which will increase bulb life and eliminate some warnings.

good luck!! you will be super happy

[TerminatorX5]

synchronize car clock to GPS time beacon.
maybe door autolock at certain speed... maybe not...
maybe roof close with rain sensor - even though sounds redundant... and really useless...
correct speedo to ACTUAL speed instead of optimistic reading...

[SlickGT1]

what is confirmed to be available? I too am getting coding soon.

[patrickkc]

mirror fold cannot be done.
door autolock at certain speed can be done.
rain sensor to close roof is really stupid and shouldn't be done. (not tested on E53 though)
Highbeams with low beams I want to try too. xenon + halogen highbeams on together? (need to test)

Everything else mentioned in the above posts can be coded.

[jgold47]

what lines are the double flash hazards and the seatbelt gong? do you know what the key in the ignition gong line is as well?

I am assuming you are using NCS, if youre using one of those fancy english language versions, forget it, I will dig out my german to english dictionary.

[SlickGT1]

****LCM Coding Options****
1. fogs on w/ hi beams
-FL_UND_NSW_NICHT_GLEICHZ - nicht_aktiv
2. disable corner/parking lamp
-BLK_V_GED_ALS_PARKLICHT - nicht_activ
3. Double Flash Hazards.
- WARNBLINKER - change einfachimpuls to doppelimpuls
4. cold monitoring License Plate Lights off
-KALTUEBERWACHUNG_KZL - change aktiv to nicht_activ
5. cold monitoring Angel Eyes off
-KALTUEBERWACHUNG_SL_LV - Left, change activ to nicht_activ
-KALTUEBERWACHUNG_SL_RV - Right, mine was nicht_activ to begin with, so no change.
6. Low beams as DRL. KMBI ->, LCM ->
-AL_ALS_DRL - change Nicht_activ to activ
7. Dimmed High Beams as DRL
-FL_dimmung_Als_drl - I have a value of "wert_06", and I do not have DRLs on. So...
8. LED Tail Light Option - if someone brings me a set of LED tails, I can test this.
-LED_RUECKLICHT_OPTION - chnage to Activ, not tested.
--Might also need to disable the following Cold Monitoring off.
---KALTUEBERWACHUNG_BL_L - change to nicht_activ
---KALTUEBERWACHUNG_BL_R - change to nicht_activ
9. Seatbelt Warning Gong
-GURTWARNUNG_GONG - change to nicht_activ
10. Seat Belt Warning on Display
-Gurtwarnung_text - choose either activ or nicht_activ
11. Fasten Seat Belt
-GURT_ANLEGEN - default is melden (report), need to research other options.
10. Key Left In Ignition Warning When door is open
-ZUENDSCHLUESSEL_WARNUNG change to nicht_activ


****GM3 Coding Options****
1. window/roof close with remote GM3
KOMFORTSCHLIESSUNG_FB - change to activ

[TerminatorX5]

7. you have to specify, which circuits you don't want to cold monitor.

9. time synch with GPS? you still have to set hours but the minutes synch

[TerminatorX5]

GPS_UHR
aktiv

[TerminatorX5]

PWM_FL_BIX
wert_02

high beam bi xenon together with high beams - not tested, change to wert_01

EDIT 10/27/14 - tested, works fine