|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
FRM Coding Problems - Solved
Thanks in advance! Last edited by n_sievers; 07-18-2015 at 08:53 AM. |
Sponsored Links | |
|
#2
|
|||
|
|||
I can upload the daten file I've used to code my E70: I can access all modules. I'll get you the link tonight.
The other thing worth checking, that has caused me errors in the past is the latency setting of the COM port used by the adapter: it needs to be set to 1msec. To get there go to the Device Manager and select the COM port of the adapter. Go to the "Port Settings" tab and click advanced. In the middle of the window there's "Latency Timer" -> set it to 1 if not yet there... |
#3
|
|||
|
|||
Thanks so much, I would greatly appreciate that! I have heard that V45 daten files have proven successful to access when later versions did not work. I have confirmed the correct latency settings.
|
#4
|
||||
|
||||
I have a few programs other than NCS expert that do the coding, but i was not able to access FRM of my '12 X5D with any of them. Please share your results.
|
#5
|
|||
|
|||
Quote:
So I spent a few hours reading last night and from what I found others area stating that must have an updated version of Ediabas (7.2.0) and now I am trying to find a good download for that to see if that resolves the issue.....I will keep you posted. |
#6
|
|||
|
|||
So to give an update..... I updated the Ediabas to version 7.2.0 and that did the trick! I completely uninstalled the entire old coding setup and installed a newer version I somehow found in a download after hours of searching! I am now able to access all of the modules that in need to finish my coding! I had an older version of Ediabas (6.4.7) and that unfortunately will not allow you to access certain newer modules.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|