|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#91
|
|||
|
|||
|
Sponsored Links | |
|
#92
|
|||
|
|||
__________________
| '17 F15 X5 35D - Work horse | '17 F48 X1 MSport Daughter's daily | '22 Tesla MY LR Wife's Daily | '09 E70 X5 35D - Out to pasture | |
#93
|
|||
|
|||
Joined this forum after reading this thread. Did any of you have to change the wiring on your preLCI headlight retrofit? I upgraded my front headlights but did not do any wiring changes on my 3.0i. After coding VO/FA to 04/2012 and removing all hot and cold checks, I'm getting low beam, high beam, Adaptive, and DRL errors. DRLs cutoff after about a minute and no high beams or adaptive. Did you guys replace S522 and 524 with 552 as well? I heard that only applies to X5M and X6s. Thx.
|
#94
|
|||
|
|||
it must be have something to do with your coding, the wires are the same as long as you had xenon from factory.
|
#95
|
|||
|
|||
Hmmmm. The preLCIs were halogen. Yours was a 2011, i.e. already wired for xenon correct?
|
#96
|
|||
|
|||
yes but I also had a 2007 Pre-LCI that was xenon from factory
|
#97
|
|||
|
|||
...and it worked without changing any wiring? Wow. Any insight on the coding? Did you switch to S552 in your VO/FA?
|
#98
|
|||
|
|||
on the 07 I didn't changed the FRM I got them to work with a relay but the wiring was 100% the same as the 2011 LCI
|
#99
|
|||
|
|||
Ok, thanks. Still puzzled whats not right with mine. Indie mechanic wanted to charge me 6 hours to check/change the wiring based on instructions for X5M/X6 retrofit kit. Thanks to you I'm feeling better about going a different route.
|
#100
|
|||
|
|||
Quote:
What's the description of that S552 VO code? Everywhere I search that specific code is missing. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|