|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
05-06-2007, 02:13 PM
|
||||
|
||||
Fixed door handle, now lock is inop..
Driver's door handle/carrier on my '01 broke, rendering the outside handle useless. I ordered a new carrier assembly (the part of the door handle on the inside of the door) and installed it, hanlde now works again. I put the door back together, and now the power lock actuator on that door is dead! I pulled the panel back off to ensure I didn't leave any wires unhooked, but everything is hooked up. The driver's door lock still operates with the key, but the remote or the central locking button doesn't do it, all the other doors will lock/unlock. That was yesterday. Now today, I get in and the window switches on the driver's door don't work! I know they worked after the handle install. The switch for the driver's window works, but the other three don't. And the driver's mirror will move, but not the passenger mirror, and the window lockout switch isn't working, the little green light on the button comes on, but the other three windows will still roll down with their door mounted window switches. so I'm completely mystified. I'm going to go pull the door panel off again and look, but this seems a little odd. Everything worked before I replaced the door handle!  Anybody have any ideas? 
|
| Sponsored Links | |
|
|
|
|
#3
05-07-2007, 12:43 AM
|
||||
|
||||
|
My actuator also stopped working when i changed my door handle carrier.
__________________
2002 X5 3.0i SOLD!!!!! Mods: AC Scnitzer Body Kit Custom painted body trim AC Schnitzer Exhaust OEM 20" style 87 wheels 3- 12" kicker comp. subwoofers (2200 watt amp) 3- TV screens (2 headrest, 1 in-dash), with PS2 Custom STRUT grille Chrome trim on headlights, foglights, handles, trunk trim, taillights OEM upgraded clear headlights, taillights, sidemarkers K&N filter Other Cars: 2002 Mercedes Benz S500 Designo (Espresso Edition) 2003 BMW 745Li Black Sapphire/Tan
|
|
#4
05-07-2007, 01:29 AM
|
|||
|
|||
|
Quote:
And it was fixed how?
__________________
2002 4.6is Dinan S2 Titanium Silver/Black Alcantara DINAN Stage 4 Engine Software Automatic Transmission Software High FlowThrottle Body Free Flow Exhaust Cold Air Intake System High Flow Air Mass Meter OTHER CCFL Angel Eyes Stealth XM Radio in ashtray : FM Mod Pilot H3 Fog Bulbs Cleared Headlights: Hi/Lo Beams Hardwired Radar Detector IN PROGRESS Powerstop C/D Rotors: (on backorder) W/EBC Red Stuff (F) W/Axxis Deluxe (R) Dice Ipod: Aux Input for XM THINKING SMG II MK4 Bluetooth
|
|
#6
05-07-2007, 09:03 PM
|
||||
|
||||
|
Thanks for the help everyone, but I have found the problem!
 It was a loose connector. There are three connectors on the back of the window switch module in the door panel. When I first had the problem, I unplugged and replugged all the connectors several times, but apparently the X wanted me to steam over the problem for a couple days, because I pulled the door panel off again and redid all the connectors, pushing them in really hard before locking down the locking tabs, and what do ya know? everything works perfectly. So moral of the story is even if the connector seems to be in and tight, it might not be. So door handle carrier is replaced and all the windows and locks are working as they were before. wees1234, you might want to pull your door panel off and recheck all your connectors.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
